huahana
XDB606-S1 moʻo naʻauao Hoʻokahi Flange Level Transmitter
Nā hiʻohiʻona
1. Pono Kiʻekiʻe: Kuhi pololei o 0.075% no nā kaʻina hana calibration maʻamau.
2. Hoʻokō Hoʻohālikelike Kūʻē: Hiki ke kū i ka 16MPa o ka overpressure ma nā pae liʻiliʻi.
3. Hiki ke hoʻololi i ke kaiapuni maikaʻi loa: E hōʻike ana i ke kaomi static naʻauao a me ka uku wela, e hōʻemi ana i nā hewa ana ma muli o ka wela, ke kaomi static, a me nā hopena overpressure.
4. ʻOi aku ka maikaʻi o ka hana a me ka maʻalahi: Hoʻolako ʻia me kahi hōʻike LCD backlit 5-helu e hāʻawi ana i nā hana like ʻole (e ʻike i nā memo koho), i kūkulu ʻia i loko o ʻekolu pihi hana wikiwiki no nā hoʻoponopono kūloko.
5. Nā mea e pale ai i ka corrosion: Loaʻa i nā mea anti-corrosion.
6. Nā Hana Hoʻonaʻauao Pono Pono: E hōʻoia i ka hana hilinaʻi a paʻa.
Nā noi maʻamau
1. ʻOihana ʻaila/Petrochemical/Kemimiki: Hoʻopili ʻia me nā mea throttling no ke ana pololei a me ka hoʻokele. E ana pololei i ka paipu a me ka pahu pahu waihona a me ka pae wai.
2. Uila / Urban Gas / 'ē aʻe: Pono ke kūpaʻa kiʻekiʻe a me ka pololei no ke kaomi, kahe, a me nā ana pae.
3. ʻOihana Pulp a me Pepa: No ke kaomi ʻana, kahe, a me nā ana pae i nā kaiapuni e pono ai ke kūʻē i nā wai kemika a me nā wai corrosive.
4. Metala kila / Non-ferrous / Ceramics: Hoʻohana ʻia no ke kaomi ʻana o ka umu ahi a me nā ana ʻana, koi i ke kūpaʻa kiʻekiʻe a me ka pololei.
5. Mechanical Equipment/Shipbuilding: Hoʻohana ʻia i nā ʻōnaehana kahi i koʻikoʻi ai nā ana paʻa o ke kaomi, kahe, a me ka pae wai ma lalo o nā kūlana i mālama ʻia.
Nā ʻāpana
| Paʻi paʻi | -30~30bar | ʻAno kaomi | Paʻi ana a me ke kaomi paʻa |
| Ka pololei | ± 0.2%FS | Volta hoʻokomo | 10.5~45V DC (palekana kūloko 10.5-26V DC ka pahū ʻana. |
| Hōʻailona puka | 4~20mA a me Hart | Hōʻike | LCD |
| Ka hopena mana | ± 0.005%FS/1V | Ka wela kaiapuni | -40~85 ℃ |
| Mea hale | Hoʻolei alumini alumini a kila kila (koho) | ʻAno sensor | Monocrystalline silika |
| Mea diaphragm | SUS316L, Hastelloy HC-276, Tantalum, uhi gula, Monel, PTFE (koe) | Loaʻa i nā mea wai | Kila kohu ʻole |
| Kaiapuni hopena wela | ± 0.095~0.11% URL/10 ℃ | Mea ana ana | Gas, mahu, wai |
| Ka wela waena | Pili i ka flange | Ka hopena kaomi paʻa | ± 0.1%FS/10MPa |
| Paʻa | ± 0.1%FS/5 makahiki | Ex-hōʻoia | Ex(ia) IIC T6 |
| Papa pale | IP66 | Pākuʻi hoʻokomo | ʻO ke kila kalapona i hoʻopaʻa ʻia a me ke kila kila kila (koho) |
| Kaumaha | ≈6.98kg | ||
Ana (mm) & pili uila
![XDB606-S1series kiʻi[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image2.jpg)
![XDB606-S1series kiʻi[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image21.jpg)
![XDB606-S1series kiʻi[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image22.jpg)
![XDB606-S1series kiʻi[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image24.jpg)
Kipi Puka
![XDB605 moʻo Kiʻi[3]](http://www.xdbsensor.com/uploads/XDB605-series-Image3.jpg)
Kiʻi hoʻonohonoho huahana
![XDB606-S1series kiʻi[3]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image3.jpg)
| Paʻa paʻa flange DN50 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 150 | 120.7 | 100 | 61 | 19.5 | 4 | 18 |
| ANSI300 | 165 | 127 | 100 | 61 | 22.7 | 8 | 18 |
| ANSI600 | 165 | 127 | 100 | 61 | 32.4 | 8 | 18 |
| ANSI900 | 215 | 165.1 | 100 | 61 | 45.1 | 8 | 26 |
| ANSI1500 | 215 | 165.1 | 100 | 61 | 45.1 | 8 | 26 |
| DINPN10/16 | 165 | 125 | 100 | 61 | 18 | 4 | 18 |
| DINPN25/40 | 165 | 125 | 100 | 61 | 20 | 4 | 18 |
| DIN PN 64 | 180 | 135 | 100 | 61 | 26 | 4 | 22 |
| DIN PN 100 | 195 | 145 | 100 | 61 | 28 | 4 | 26 |
| DIN PN 160 | 195 | 145 | 100 | 61 | 30 | 4 | 26 |
| Paʻa paʻa flange DN80 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 190 | 152.4 | 130 | 89 | 24.3 | 4 | 18 |
| ANSI300 | 210 | 168.3 | 130 | 89 | 29 | 8 | 22 |
| ANSI600 | 210 | 168.3 | 130 | 89 | 38.8 | 8 | 22 |
| ANSI900 | 240 | 190.5 | 130 | 89 | 45.1 | 8 | 26 |
| ANSI1500 | 265 | 203.2 | 130 | 89 | 54.7 | 8 | 33 |
| DINPN10/16 | 200 | 160 | 130 | 89 | 20 | 8 | 18 |
| DINPN25/40 | 200 | 160 | 130 | 89 | 24 | 8 | 18 |
| DIN PN 64 | 215 | 170 | 130 | 89 | 28 | 8 | 22 |
| DIN PN 100 | 230 | 180 | 130 | 89 | 32 | 8 | 26 |
| DIN PN 160 | 230 | 180 | 130 | 89 | 36 | 8 | 26 |
| Paʻa flange DN100 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 230 | 190.5 | 150 | 115 | 24.3 | 8 | 18 |
| ANSI300 | 255 | 200 | 150 | 115 | 32.2 | 8 | 22 |
| ANSI600 | 275 | 215.9 | 150 | 115 | 45.1 | 8 | 26 |
| ANSI900 | 290 | 235 | 150 | 115 | 51.5 | 8 | 33 |
| ANSI1500 | 310 | 241.3 | 150 | 115 | 61.0 | 8 | 36 |
| DINPN10/16 | 220 | 180 | 150 | 115 | 20 | 8 | 18 |
| DINPN25/40 | 235 | 190 | 150 | 115 | 24 | 8 | 22 |
| DIN PN 64 | 250 | 200 | 150 | 115 | 30 | 8 | 26 |
| DIN PN 100 | 265 | 210 | 150 | 115 | 36 | 8 | 30 |
| DIN PN 160 | 265 | 210 | 150 | 115 | 40 | 8 | 30 |
| Paʻa paʻa flange DN50 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 150 | 120.7 | 100 | 48 | 19.5 | 4 | 18 |
| ANSI300 | 165 | 127 | 100 | 48 | 22.7 | 8 | 18 |
| ANSI600 | 165 | 127 | 100 | 48 | 32.4 | 8 | 18 |
| ANSI900 | 215 | 165.1 | 100 | 48 | 45.1 | 8 | 26 |
| ANSI1500 | 215 | 165.1 | 100 | * | 45.1 | 8 | 26 |
| DINPN10/16 | 165 | 125 | 100 | 48 | 18 | 4 | 18 |
| DINPN25/40 | 165 | 125 | 100 | 48 | 20 | 4 | 18 |
| DIN PN 64 | 180 | 135 | 100 | 48 | 26 | 4 | 22 |
| DIN PN 100 | 195 | 145 | 100 | 48 | 28 | 4 | 26 |
| DIN PN 160 | 195 | 145 | 100 | 48 | 30 | 4 | 26 |
| Paʻa paʻa flange DN80 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 190 | 152.4 | 130 | 71 | 24.3 | 4 | 18 |
| ANSI300 | 210 | 168.3 | 130 | 71 | 29 | 8 | 22 |
| ANSI600 | 210 | 168.3 | 130 | 71 | 38.8 | 8 | 22 |
| ANSI900 | 240 | 190.5 | 130 | 71 | 45.1 | 8 | 26 |
| ANSI1500 | 265 | 203.2 | 130 | * | 54.7 | 8 | 33 |
| DINPN10/16 | 200 | 160 | 130 | 71 | 20 | 8 | 18 |
| DINPN25/40 | 200 | 160 | 130 | 71 | 24 | 8 | 18 |
| DIN PN 64 | 215 | 170 | 130 | 71 | 28 | 8 | 22 |
| DIN PN 100 | 230 | 180 | 130 | 71 | 32 | 8 | 26 |
| DIN PN 160 | 230 | 180 | 130 | 71 | 36 | 8 | 26 |
| Paʻa flange DN100 papa ʻāpana ʻāpana: mm | |||||||
| Flange maʻamau | A | B | C | D | T1 | Ka helu o nā bolts(n） | Anawaena puka kī(d) |
| ANSI150 | 230 | 190.5 | 150 | 96 | 24.3 | 8 | 18 |
| ANSI300 | 255 | 200 | 150 | 96 | 32.2 | 8 | 22 |
| ANSI600 | 275 | 215.9 | 150 | 96 | 45.1 | 8 | 26 |
| ANSI900 | 290 | 235 | 150 | 96 | 51.5 | 8 | 33 |
| ANSI1500 | 310 | 241.3 | 150 | * | 61.0 | 8 | 36 |
| DINPN10/16 | 220 | 180 | 150 | 96 | 20 | 8 | 18 |
| DINPN25/40 | 235 | 190 | 150 | 96 | 24 | 8 | 22 |
| DIN PN 64 | 250 | 200 | 150 | 96 | 30 | 8 | 26 |
| DIN PN 100 | 265 | 210 | 150 | 96 | 36 | 8 | 30 |
| DIN PN 160 | 265 | 210 | 150 | 96 | 40 | 8 | 30 |
Pehea e kauoha ai
E laʻa me XDB606 - S1 - H - R1 - W1 - SS - C1 -G1 -D1 - A - X1 - DY - M20 - M - H - Q
| Ke kumu hoʻohālike/ikamu | Code kikoʻī | wehewehe |
| XDB606 | S1 | Hoʻokahi Flange Level Transmitter |
| Hōʻailona puka | H | 4-20mA, Hart, 2-uea |
| Laulā ana | R1 | 1~6kPa: -6~6kPa Ka palena hoʻonui: 2MPa |
| R2 | 4 ~ 40kPa: -40 ~ 40kPa Ka palena o ka ukana: 7MPa | |
| R3 | 10~100KPa, Laulā: -100~100kPa Ka palena hoʻonui: 7MPa | |
| R4 | 40~400KPa, Laulā: -100~400kPa Ka palena palena: 7MPa | |
| R5 | 0.3-3MPa, Laulā: -0.1-3MPa palena hoʻonui: 7MPa | |
| Mea hale | W1 | Hoʻolei alumini alumini |
| W2 | Kila kohu ʻole | |
| Loaʻa i nā mea wai | SS | Diaphragm: SUS316L, Loaʻa nā mea wai ʻē aʻe: kila kila |
| HC | Diaphragm: Hastelloy HC-276 Nā mea hoʻopili wai ʻē aʻe: kila kila | |
| TA | Diaphragm: Tantalum Nā mea hoʻopili wai ʻē aʻe: Kuleana kila | |
| GD | Diaphragm: i uhi ʻia i ke gula, nā mea hoʻopili wai ʻē aʻe: kila kila | |
| MD | Diaphragm: Monel Nā mea hoʻopili wai ʻē aʻe: kila kila | |
| PTFE | Diaphragm: ka uhi PTFE ʻO nā mea hoʻopili wai ʻē aʻe: ke kila kila | |
| Ke Kaʻina Hana ʻaoʻao Haʻahaʻa Hoʻohui | C1 | 1/4 NPT wahine |
| C2 | 1/2 NPT wahine | |
| ʻO Flange ʻaoʻao kiʻekiʻe Hōʻike
| G1 | GB/T9119-2010 (National Standard): 1.6MPa |
| G2 | HG20592 (Kemimi Hana Kūlana): 1.6MPa | |
| G3 | DIN (Kelemānia Kūlana): 1.6MPa | |
| G4 | ANSI (American Standard): 1.6MPa | |
| GX | Hoʻopilikino ʻia | |
| ʻO Flange ʻaoʻao kiʻekiʻe Nui | D1 | DN25 |
| D2 | DN50 | |
| D3 | DN80 | |
| D4 | DN100 | |
| D5 | Hoʻopilikino ʻia | |
| Mea Flange | A | 304 |
| B | 316 | |
| C | Hoʻopilikino ʻia | |
| Diaphragm Protrusion Length | X1 | ***mm |
| Ka lōʻihi capillary | DY | ***mm |
| Pili uila | M20 | M20 * 1.5 wahine me kahi kī makapō a me kahi mea hoʻohui uila |
| N12 | Wahine 1/2NPT me kahi kī makapō a me kahi mea hoʻohui uila | |
| Hōʻike | M | Hōʻike LCD me nā pihi |
| L | Hōʻike LCD me nā pihi ʻole | |
| N | AOLE | |
| 2-inihi paipu hoʻokomo pale pale | H | Palekana |
| N | AOLE | |
| Mea paʻa | Q | ʻO ka hao hao hao |
| S | Kila kohu ʻole |
